ASTM A403 WP304 bend is part of a group of pipe fittings intended for moderate and high temperature services. The fittings are made up of the A403 specification and of wrought austenitic stainless steel 304. The 304 Stainless Steel Bends is used to make turns in pipe systems to change the direction of the pipes. There are different dimensions and types in fitting. The material is made up of carbon, manganese, phosphors, sulfur, silicon, 18% chromium and 8% nickel with molybdenum up to 10.5%.
304 Stainless Steel Bends Manufacturer
304 Stainless Piggable Bend
This allows the ASTM A403 WP304L elbow and other fittings to be strong, corrosion resistant and long lasting. This is also the most used grade for pipe fittings as it is economically viable for most projects. They come in different brands such as the 304 SS Mandrel bends. We are Manufacturer of ss 304 elbow in sizes ranges from ½ inches to 96 inches depending on the different application requirements. There are different pressure capacities of fittings. A SS 304 Bend can range from sch10s through sch160 and up to XXS.
The application of ASTM A403 WP304L bend can be seen in oil and gas, paper mill, marine, construction and structural applications. The Stainless Steel 304 Elbow is one of the commonly used type of fitting that is used to slowly change the direction of pipe usually in 90 degrees angle. There are special types of elbows that have 45 degrees angle, short radius and long radius. The 304 Stainless steel 90 degree elbow is the one that is generally used.
| Specifications | ASTM A403 & ASME SA403 |
| Size | Seamless 1/2 inch to 24 inch; Welded / ERW : 2 inch to 36 inch. |
| Outer Diameter | 38.0 mm - 206.0 mm |
| Manufacturers of A403 WP304 Elbow Wall Thickness | 1.5 mm / 2.0 mm / 3.0 mm - greater wall thickness at request |
| Bending radius (R) | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Bending |
| Bend Radius & Bending angle (θ) | 15 Deg, 22 Deg, 22.5 Deg, 30Deg, 45 Deg, 60Deg, 90 Deg, 135 Deg, 180 Degree Elbow or custom. |
| End | ASME B16.9 / B16.49; BE |
| Schedule | SCH 40, SCH 80, SCH XS, SCH 80S, SCH 160, SCH 5, SCH XXS, SCH10 |
| Finish | Manufacturer of 304 stainless steel mandrel bends in 2b finish, 180 grit finish, #8 finish, Finished pickled, #4 finish ra |
| Bending set | R300, R50 |
| 304 Steel Bend Certification | JIS, En, API, DIN, BS, ASME, Ce, ANSI. |
| Mill specification | MESC SPE 76/200 2018, EN 10204 -3.1, MESC SPE 74/002 2018 , ISO 10474 -3.1 |
| Fittings | Rigid PVC/HDPE e = 0.005 mm |
GRP/FRP e = 0.02 mm |
Commercial Steel e = 0.05 mm |
Spiral Weld Steel e = 0.1 mm |
|---|---|---|---|---|
| Threaded 304 Stainless Steel Tubing Bends | ||||
| 90° pipe elbow, r/d=1 | 37 | 34 | 30 | 26 |
| 45° pipe elbow, r/d=1 | 20 | 18 | 16 | 14 |
| Welded 304 Stainless Steel Tubing Bends | ||||
| 90° pipe elbow, sharp bend | 69 | 63 | 55 | 49 |
| 90° pipe elbow, r/d=1 | 23 | 21 | 19 | 16 |
| 90° pipe elbow, r/d=1.5 | 17 | 15 | 13 | 12 |
| 90° pipe elbow, r/d=2 | 14 | 13 | 11 | 10 |
| 45° pipe elbow, sharp bend | 22 | 20 | 18 | 16 |
| 45° pipe elbow, r/d=1 | 17 | 16 | 14 | 12 |
| 45° pipe elbow, r/d=1.5 | 12 | 11 | 9.4 | 8.3 |
Stainless Steel 304 Long Radius Bend
SS 304 Piggable Bend
304 Stainless Hot Induction Bend
Stainless Steel WP304 Seamless Pipe Bend
UNS S30400 SS Grade 1.4301 Welded Pipe Bend
Stainless 304 U Pipe Bend
ASTM A403 304 Stainless Steel J Bend
304 SS Mitered Pipe Bend
Stainless Steel Din 1.4301 3D Pipe Bend
Stainless Steel 304 5D Pipe Bend
ASME SA403 SS 304 10D Pipe Bend
304 Stainless Steel Tubing Bends
Werkstoff No 1.4301 SS UNS S30400 45 Degree bend
Material SS 1.4301 AISI 304 90 Degree bend
ASTM A403 GR WP304 Return Bend
ASTM A403 Grade WP304 S Bend
304 SS Mandrel Bends
ASME SA403m Stainless Steel 304 Exhaust Bends
304 Stainless Steel Tubing Bends
SCH 10s 5D Grade 304 Stainless Steel Bend
Pipe Bend Base Material & Thickness (304 Stainless Steel) |
Radius |
Minimum Bend |
|---|---|---|
| 14 gauge ( 0.078" | 1.98 mm ) | 0.078" | 0.351" |
| 16 gauge ( 0.063" | 1.59 mm ) | 0.05" | 0.285" |
| 18 gauge ( 0.050" | 1.27 mm ) | 0.045" | 0.25" |
| 20 gauge ( 0.037" | 0.94 mm ) | 0.04" | 0.23" |
| Get free quote from Elbow SS 304 manufacturer in India | ||
| Gauge | 304 Stainless Steel Minimum Bend Radius Includes Minimum Closeness of Cutout to Bend |
304 Stainless Bend Radius (Refers to Inner Radius) |
| 11 gauge (0.120" |3.05mm) | .5" | .07", .08", .09", .1", .125" |
| 14 gauge (0.075" | 1.9 mm) | .275" | .05", .055", .062", .07", .075" |
| .375" | .07", .105" | |
| .5" | .09", .11", .115", .12" | |
| 1.375" | .4" | |
| 16 gauge (0.060" | 1.52 mm) | .2" | .035", .05" |
| .265" | .05", .055", .075", .08" | |
| .375" | .07" | |
| .5" | .105", .12" | |
| 18 gauge (0.048" | 1.22 mm) | .2" | .04", .045", .05" |
| .265" | .06", .07", .08", .085" | |
| .375" | .1", .125" | |
| .5" | .115", .12" | |
| 20 gauge (0.035" | 0.89 mm) | .2" | .05" |
| .265" | .06", .07" | |
| .375" | .095" | |
| 22 gauge (0.029" | 0.74 mm) | .2" | .05" |
| .265" | .04", .08" | |
| 24 gauge (0.024" | 0.61 mm) | .2" | .04" |
| .265" | .08" |
Before order please compare our price with other 304 Stainless Steel Bends Manufacturer in India
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | - | 8 – 11 | - |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| Grade | Elastic Modulus (GPa) | Density (kg/m3) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity(W/m.K) | Electrical Resistivity (n.m) | Specific Heat 0-1000C(J/kg.K) | |||
|---|---|---|---|---|---|---|---|---|---|
| 0-1000C | 0-5380C | 0-3150C | at 5000C | at 1000C | |||||
| A403 WP304 | 193 | 8000 | 17.2 | 18.4 | 17.8 | 21.5 | 16.2 | 720 | 500 |
| Black Coated, 304 Stainless Steel Bends, Sch 80, 4 Inch | Noida, Indonesia, Philippines, Dammam -KSA, Mumbai, Belgium |
| Stainless Steel 304 90D Bend, 10 Inch, ANSI B16.49, 5D, SCH 40 | Sikandrabad, Thailand, France, Europe, Qatar, Bengaluru |
| 30 Degree Pipe Bend, 5D, SA 403 WP 304, SCH 80, ANSI B16.9, 6 Inch | Germany, Thailand, Thiruvananthapuram, Czechia, Chennai, Malaysia |
| ASTM A403 Gr WP304 30D Bends, 30 Inch | Malaysia, Surat, Finland, Pune, USA, Bangladesh |
| ANSI B16.9 ASTM A403 WP 304 SS Bend, BW Ends, Black Coating, 24 Inch | Kuwait, Ahmedabad, South Africa, Saudi Arabia (KSA), Brazil |
| ASME SA403 SS 304 45D Bend, 36 Inch, 11.90 MM, ANSI B16.49 | Bahrain, Singapore, South Africa, Kolkata, Agra |
| SS A403 WP304, Seamless 5D Bend, 90 Deg., Beveled Ends | UK, Australia, Thane, Hyderabad, Philippines, France, Nigeria |
| 16 Inch, ANSI B16.9 Stainless Steel 304 Bend, 5D, 90 Deg | Oman, UAE, Patna, Ahmedabad, Hong Kong, Malaysia |
| ANSI B16.49 6D Bend, 20 Inch, SCH 60, A403 WP304 Stainless Steel, BW Ends | Singapore, Visakhapatnam, Iran, Chile, Italy, Bhopal, Delhi |
| Stainless Steel 304 3D Bend Pipe Fittings | Coimbatore, United Arab Emirates (UAE), Turkey, Norway, Malaysia |
| ANSI B16.9 Stainless Steel 304 5D Bend, 6 Inch, 45 Degrees, SCH 80 | Dehradun, Russia, Dubai, Malaysia, Kochi, Netherlands |
| 36 Inch, ANSI B16.49 Grade WP304 Stainless Steel 90 Deg Bend, R=3D | Egypt, Nagpur, UK, Mexico, Lucknow, Spain, Nashik |
| ANSI B16.49 SS UNS S30400 3D Hot Induction Seamless Bends, 90 Degree | Malaysia, Europe, United Kingdom -UK, Indore, UAE |
| 72 Inch, 1.5D Miter Bend, SS Grade WP304, 45D, BW | Ellington -United States, Navi Mumbai, Canada, Poland, UK |
| 304 Stainless Steel Bend Pipe Fittings | Jaipur, Canada, Ludhiana, Philippines, Malaysia, Singapore |
| Stainless Steel ASTM A403 WP304 90D Bends, WT 0.938 Inch, 36 Inch | Faridabad, Japan, Malaysia, Europe, Chandigarh, Romania |
| ANSI B16.49 304 Stainless Steel Bend, 30 Deg, 26 Inch | Sweden, Colombia, Vadodara, China, Malaysia, Rajkot |
| Grade WP304 Stainless Steel Pipe Bends, R=5D, ASME B16.49 | Malaysia, Philippines, Taiwan, Los Alamos -Mexico, Bhuneshwar |
| 1.5D, ASME B16.9, Werkstoff No 1.4301 SS 90 Degree Miter Bend, BW, 90IN | NY 12203 (USA), South Korea, Gurgaon, Malaysia, Singapore |
Rajkot, Pune, Kolkata, Chennai, Gujarat, Amravati, Ahmedabad, Coimbator, Madhya Pradesh.