ASTM A335 P22 pipe suppliers produce the p22 pressure pipes in different dimensions. These pipes are also known as 2 ½ chrome pipes. The SA 335 Gr P22 ERW pipe can range in size from ½ NPS to 30 NPS and the wall thicknesses can range up to 4 inches in various schedules. The pipes have increased oxidation resistance and strength. The A335 Gr P22 steel pipe also has creep resistance due to the chromium and molybdenum content.
ASTM A335 P22 Alloy Steel Seamless Pipe
P22 Alloy Steel Pipe
The carbon content is limited to 0.15%. The SA335 P22 material has carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum. The material is suitable for high temperature services. The ASTM A335 Grade P22 seamless pipes are cold drawn where there is electric resistance welded pipes are also available. The minimum tensile strength of the Alloy steel P22 Welded Pipe is 415MPa and the minimum yield strength is 205MPa. The applications of the pipes include chemical, sea water, pharmaceutical equipment, heat exchanger, condenser, pulp and paper industrial applications.
The ASTM A335 P22 Chrome moly pipe is also used in power generation, off shore oil drilling, petrochemical, gas processing and in specialty chemical applications. Depending on the UNS K21590 Pipe wall thickness, outer diameter and schedule, the application types vary.
|
Alloy Steel Pipe in Grade
|
ASTM A335 P1/ P2/ P5/ P5b/ P5c/ P9/ P11/ P12/ P15/ P21/ P22/ P23/ P24/ P36/ P91/ P92/ P122/ P911
(with IBR Test Certificate) |
|
In Length of
|
Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths
|
|
Value Added Service
|
Draw & Expansion as per required Size & Length Heat Treatment, Bending, Annealed, Machining Etc. |
|
Test Certificate
|
Manufacturer Test Certificate IBR Test Certificate Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection |
| Form | Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes |
| End | Plain End, Beveled End, Threaded |
| Type | Seamless / ERW / Welded / Fabricated / CDW |
| End Protection | Plastic Caps |
| Outside Coating | Black Painting, Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements |
| Inspection, Test Certificate/ Reports | Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate |
| C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
| 0.015 max | 0.30-0.61 | 0.025 max | 0.025 max | 0.50 max | 1.90-2.60 | 0.87-1.13 |
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 415 min | 205 min | 30 min |
| P5, P9, P11, and P22 Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing or Tempering Temperature Range F [C] |
| P5 (b,c) | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| Subcritical Anneal (P5c only) | ***** | 1325 – 1375 [715 – 745] | |
| P9 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P11 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1200 [650] | |
| P22 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P91 | Normalize and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
| Quench and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
|
ASTM A450
|
Hot rolled
|
Outside Diameter, mm
|
Tolerance, mm
|
|
OD≤101.6
|
+0.4/-0.8
|
||
|
101.6＜OD≤190.5
|
+0.4/-1.2
|
||
|
190.5＜OD≤228.6
|
+0.4/-1.6
|
||
|
Cold Drawn
|
Outside Diameter, mm
|
Tolerance, mm
|
|
|
OD＜25.4
|
±0.10
|
||
|
25.4≤OD≤38.1
|
±0.15
|
||
|
38.1＜OD＜50.8
|
±0.20
|
||
|
50.8≤OD＜63.5
|
±0.25
|
||
|
63.5≤OD＜76.2
|
±0.30
|
||
|
76.2≤OD≤101.6
|
±0.38
|
||
|
101.6＜OD≤190.5
|
+0.38/-0.64
|
||
|
190.5＜OD≤228.6
|
+0.38/-1.14
|
||
|
ASTM A530 & ASTM A335
|
NPS
|
Outside Diameter, inch
|
Tolerance, mm
|
|
1/8≤OD≤1-1/2
|
±0.40
|
||
|
1-1/2＜OD≤4
|
±0.79
|
||
|
4＜OD≤8
|
+1.59/-0.79
|
||
|
8＜OD≤12
|
+2.38/-0.79
|
||
|
OD>12
|
±1%
|
|
ASTM A450
|
Hot rolled
|
Outside Diameter, mm
|
Tolerance, %
|
|
OD≤101.6, WT≤2.4 |
+40/-0
|
||
|
OD≤101.6, 2.4＜WT≤3.8
|
+35/-0
|
||
|
OD≤101.6, 3.8＜WT≤4.6
|
+33/-0
|
||
|
OD≤101.6, WT>4.6
|
+28/-0
|
||
|
OD>101.6, 2.4＜WT≤3.8
|
+35/-0
|
||
|
OD>101.6, 3.8＜WT≤4.6
|
+33/-0
|
||
|
OD>101.6, WT>4.6
|
+28/-0
|
||
|
Cold Drawn
|
Outside Diameter, mm
|
Tolerance, %
|
|
|
OD≤38.1
|
+20/-0
|
||
|
OD>38.1
|
+22/-0
|
||
|
ASTM A530
|
NPS
|
Outside Diameter, inch
|
Tolerance, %
|
|
1/8≤OD≤2-1/2
|
+20.0/-12.5
|
||
|
3≤OD≤18, WT/OD≤5%
|
+22.5/-12.5
|
||
|
3≤OD≤18, WT/OD>5%
|
+15.0/-12.5
|
||
|
OD≥20, WT/OD≤5%
|
+22.5/-12.5
|
||
|
OD≥20, WT/OD>5%
|
+15.0/-12.5
|
| O.D. x Thickness(mm) | O.D x Thickness(mm) | O.D x Thickness(mm) |
|---|---|---|
| 38.1 x 3.2 | 57.0 x 4.9 | 76.2 x 4.0 |
| 38.1 x 4.0 | 57.0 x 6.3 | 76.2 x 5.0 |
| 38.1 x 6.3 | 57.0 x 7.9 | 76.2 x 6.3 |
| 42.4 x 3.2 | 60.3 x 3.2 | 82.5 x 4.5 |
| 42.4 x 4.0 | 60.3 x 3.6 | 88.9 x 3.2 |
| 44.5 x 3.2 | 60.3 x 5.0 | 88.9 x 3.6 |
| 44.5 x 6.3 | 63.5 x 3.2 | 88.9 x 4.0 |
| 48.3 x 3.2 | 63.5 x 3.6 | 101.6 x 3.6 |
| 48.3 x 3.6 | 63.5 x 4.0 | 101.6 x 4.5 |
| 50.8 x 4.5 | 63.5 x 6.3 | 101.6 x 6.3 |
| 51.0 x 3.2 | 63.5 x 7.9 | 114.3 x 3.6 |
| 51.0 x 3.6 | 70.0 x 3.2 | 114.3 x 5.0 |
| 51.0 x 6.3 | 70.0 x 3.6 | 139.7 x 4.0 |
| 57.0 x 3.2 | 70.0 x 6.3 | 139.7 x 5.0 |
| 57.0 x 3.6 | 76.2 x 3.6 | 139.7 x 6.3 |
BAO STEEL- BAO Hydraulic Line Pipes
INDIAN SEAMLESS METAL TUBES LIMITED-ISMT Hydraulic Line Pipes
JINDAL SAW LTD -JSL Hydraulic Line Pipes
YANGZHOU LONTRIN STEEL TUBE -Lontrin Hydraulic Line Pipes
MAHARASTRA SEAMLESS LIMITED -MSL Hydraulic Line Pipes
SUMITOMO METALS SMTM Hydraulic Line Pipes
TENARIS -TNRS Hydraulic Line Pipes
UNITED SEAMLESS LIMITED -USL Hydraulic Line Pipes
| ASTM | ASME | Equivalent material | JIS G 3458 | UNS | BS | DIN | ISO | ABS | NK | LRS |
|---|---|---|---|---|---|---|---|---|---|---|
| A335 P22 | SA335 P22 | T22, 10CrMo910, 10CrMo9-10, 1.7380, 11CrMo9-10, 1.7383 | STPA 24 | K21590 | 3604 P1 622 | 17175 10CrMo910 |
2604 II TS34 | ABS 13 | KSTPA 24 | Sec 2 2-1/4Cr1Mo410 |
| ASTM International | BSi - British Standards institute | Material |
|---|---|---|
| ASTM A335 Gr. P22 Pipe | 3604/622 | 2 1/4% Cr 1% No |
| ASTM | ASME |
|---|---|
| ASTM A335 Grade P22 Pipe 2-1/4% Chrome; 1% Moly | SA335 Grade P22 2-1/4% Chrome; 1% Moly |
| Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
| 1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
| 0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
| 0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
| 0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
| 3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
| 0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
| 0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
| 0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
| 1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
| 0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
| 0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
| 0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
| 1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
| 0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
| 0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
| 0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
| 1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
| 0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
| 0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
| 0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
| 2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
| 0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
| 0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
| 0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
| 0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
| 0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
| 0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
| 2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
| 0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
| 0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
| 0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
| 0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
| 0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
| 0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
| 3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
| 0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
| 0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
| 0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
| 0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
| 0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
| 0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
| 0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
| 0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
| 0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
| 3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
| 0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
| 0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
| 0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
| 0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
| 0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
| 4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
| 0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
| 0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
| 0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
| 0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
| 0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
| 0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
| 0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
| 0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
| 0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
| 0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
| 0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
| 0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
| 5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
| 0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
| 0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
| 0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
| 0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
| 0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
| 0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
| 0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
| 0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
| 0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
| 6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
| 0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
| 0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
| 0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
| 0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
| 0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
| 0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
| 0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
| 0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
| 0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
| 0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
| 0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
| 0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
| 0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
| 0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
| 0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
| 0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
| 1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
| 1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
| Size | MSL Make | JSL Make | ISMT make |
|---|---|---|---|
| 1.25" | 3,852.94 | 3,860.29 | 3,845.59 |
| 1/2" | 4,264.71 | 4,272.06 | 4,257.35 |
| 1" | 3,897.06 | 3,904.41 | 3,889.71 |
| 3/4" | 4,044.12 | 4,051.47 | 4,036.76 |
| 1.5" | 3,750.00 | 3,757.35 | 3,742.65 |
Turkey, Iraq, Qatar, Nigeria, Malaysia, Saudi Arabia, Vietnam, Germany, UK, UAE, Singapore, Indonesia, Thailand, Sri Lanka