Stainless Steel u bends are used to reverse the direction of piping in piping systems. In cooling systems and heating systems the pipes often go up and down in direction. To make these structures, the U Pipe bend are extremely useful. The bends could be short or long, and the material grades can differ. The U Bend Pipe Fitting varies in diameter with the applications. The most used range is ½ inches through 48 inches in diameter which is the ASME B16.9 standard.
U Pipe Bend
Stainless Steel U Bends
There are pipes made in duplex steel as well. These piping require the duplex steel 180 degree U shape pipe elbow or bends to make the turn. To keep the strength and integrity of the piping intact, the same material grade bends or elbows are used. Bends differ from elbows mainly in the shape that the bends are gradual turns where the elbows are of sudden turning.
The U type bend pipe has the advantage of distributing the pressure and momentum along the bent surface of the bends so that the gradual execution of stabilization occurs. The U Bends Pipe products manufactured by us are of superior quality. We test all our Tubing U Bends to the international standards. Please contact us for any kind of U bend needs.
|Diameter Nominal||Inches||Ser. B||Ser. A|
|ASTM A420 WPL3 U Bends||P235GH||DIN 2391 ST 52|
|ASTM A420 WPL6 U Bends||ASTM A53 Gr.B||S235JR|
|ASTM A106 Grade A U Bends||A516 Gr. 70 U Bends||ASTM A333 Gr 6 U Bends|
|A516 Gr 60 U Bends||ST35.8, ST45.8||ASTM A234 WPB|
|ASTM A106 GR. B||A515 Gr 70||Din 2633 c22.8|
|A515 Grade 60 U Bends||ST37.0|
O.D. : 38.0 - 206.0 Millimetre.
Available Radius : 2.5D, 3D Bend, 5D, 10D Bend, 22D.
U Bend Shaped Size : Seamless 1/2 inch to 24 inch; Welded / ERW : 2 inch to 36 inch.
Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,200 / 1,500 mm.
Bending angle (θ) : 15 Degree, 30°, 45 Deg, 60°, 90 Deg, 135°, 180 Degree Elbow.
Types : Welded, Seamless, ERW, Fabricated
Width : 500 - 2500 Millimetre