Carbon Steel Return Bend manufacturer in India

15mm Copper 180 Degree long radius elbow supplier and exporter in Mumbai.

There are different types of pipe fittings available in the market. Kanak Metal & Alloys is a supplier and manufacturer of pipe fittings in different types and materials. The bends is one type of fittings and there are many different varieties of bends. The return bend is a special type because it reverses the direction of the pipeline. The Carbon Steel Return Bend are used in systems where the flow is directed up and down or back and forth.

Return Bend Manufacturer

Return Bend Manufacturer

180 Degree Copper Return Bend

180 Degree Copper Return Bend

We are Stainless Steel Return Bends manufacturer which are used in recycling systems, heating and cooling applications, waste water management and sea water applications. The advantage of the 180 degree copper return bend is that it is in one piece and manages the stress and pressure differences in turning the direction in a completely opposite turn. We manufacture return bends pipe fitting types in different radiuses and in different materials.

180 Degree Return Bend

Table of Content


There are short radius bends as well as long radius ones. The ASME B16.9 standard bends range between ½ inches and 48 inches in the diameter of the bends. There are other standards as well. As a copper return bend manufacturer we also produce copper bends of different types in different copper alloys and in commercially pure copper material. Our 180 return bends are good for welded applications. Also, we take custom order. So please contact us with any of your custom orders and we will cover them for you.

We Stock Different Alloy Steel Return Bends Grades

SA234 WP11 A 234 WP9
A234 WP9 Cl1 SA 234 WP22
A234 WP91 ASTM A234 WP5

Available Stainless Steel Return Bends Pipe fittings upto 24 inch sizes.


Spec Chart of ASME B16.9 Return Bend

Return bends pipe Fitting Size : Seamless 1/2 inch to 24 inch; Welded / ERW : 2 inch to 36 inch.

Available Radius : 2.5D Pipe Bends, 3D Bends, 5D Pipe Bends, 10D Bends, 22D Pipe Bends.

Bending angle (θ) : 15 Deg, 22 Deg, 22.5 Deg, 30Deg, 45 Deg, 60Deg, 90 Deg, 135 Deg, 180 Degree Elbow or custom.

Types : Manufacturer of 15mm Return Bend in Welded, Seamless, ERW, Fabricated

Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm.

O.D. : 38.0 mm - 206.0 mm.


Check Long/ Short Radius Return Bend Standard Dimensions, Offer Air duct Elbow in Welded/ Seamless/ Fabricated Form.


Sizing and Dimensions of 180 degree return bend

180 degree return bend Dimensions and Size

NPS Dia. Nominal O.D. at Bevel Center-to-Center (O) Back-to-Face (K)
LR SR LR SR
1/2 15 21.3 76 　 48 　
1 25 33.4 76 51 56 41
1-1/4 32 42.2 95 64 70 52
1-1/2 40 48.3 114 76 83 62
2 50 60.3 152 102 106 81
2-1/2 65 73.0 190 127 132 100
3 80 88.9 229 152 159 121
3-1/2 90 101.6 267 178 184 140
4 100 114.3 305 203 210 159
5 125 141.3 381 254 262 197
6 150 168.3 457 305 313 237
8 200 219.1 610 406 414 313
10 250 273.0 762 508 518 391
12 300 323.8 914 610 619 467
14 350 355.6 1067 711 711 533
16 400 406.4 1219 813 813 610
18 450 457 1372 914 914 686
20 500 508 1524 1016 1016 762
22 550 559 1676 1118 1118 838
24 600 610 1829 1219 1219 914

Refer Black Iron Return Bend Radius Table, Buy Water Return Elbow at affordable price.

Water Return Elbow Radius Chart

Standard pipe Spec . Bauart 5 2,5D
DN Diameter [ØD] CLR CLR CLR
20 26,9 110   67
25 33,7 110   84
32 42,4 110   106
40 48,3 110   212
50 60,3 125   151
65 76,1   175 190
80 88,9   205 222
100 114,3   270 286
125 139,7   330 350
150 168,3   390 421
200 219,1   510  
250 273   650  
300 323,9   775  
350 355,6   850  
400 406,4   970  
500 508   1245  

Black Iron Return Bend Pipe Fitting Rate Card

Compare price of ASTM A403 WP316L Return Elbow from other Manufacturers in the market.

Product Price
180 degree return bends carbon steel pipe elbow $4.40 - $5.00/ Piece
Refrigeration Pipe Fitting Copper Return U Bend $0.10 - $0.24/ Piece
Copper pipe fittings return u Bend $1.65 - $2.00/ Piece

List of 180 degree copper return bend Types Manufacturer in Mumbai

Butt Weld Pipe Fitting 180 Degree Return
Butt Weld Pipe Fitting 180 Degree Return
90/10 C70600 copper return bend aluminum elbow
90/10 C70600 copper return bend aluminum elbow
180 degree U bend pipe copper return bends
180 degree U bend pipe copper return bends

24 inch 90 degree carbon steel elbow 180 return elbow bend
24 inch 90 degree carbon steel elbow 180 return elbow bend
DIN2605 Standard 180 deg Return Long Radius Pipe Fitting
DIN2605 Standard 180 deg Return Long Radius Pipe Fitting
2WU 180 Degree Sanitary Stainless Steel Weld End Return Bend
2WU 180 Degree Sanitary Stainless Steel Weld End Return Bend

Stocking Distributor of 1/2 and 3/4 inch Galvanized Pipe Return Bend, Well-Known 15mm, 22mm Copper Returning elbow Supplier in India.

Return air drop elbow Dimensions Tolerance

NOMINAL PIPE SIZE NPS ANGULARITY TOLERANCES ANGULARITY TOLERANCES ALL DIMENSIONS ARE GIVEN IN INCHES. TOLERANCES ARE EQUAL PLUS AND MINUS EXCEPT AS NOTED.
  Off Plane P Off Angle Q (1) Out-of-round is that the add of absolute values of and minus tolerance.
(2) This tolerance might not apply in localized areas of formed fittings wherever increased wall thickness is needed to fulfill style needs of ASME B16.9.
(3) The nominal wall thicknesses and the I.D. at ends are to be specified by the customer.
(4) Unless otherwise specified by the buyer, these tolerances apply to the nominal I.D., that equals the difference between the minimal O.D. and double the nominal wall thickness.
18 to 24 0.38 0.12
½ to 4 0.06 0.03
32 to 42 0.50 0.19
5 to 8 0.12 0.06
44 to 48 0.75 0.18
10 to 12 0.19 0.09
14 to 16 0.25 0.09
26 to 30 0.38 0.19

Weight Table of Stainless Steel Return Bends

Nominal
Pipe Size		Outside
Diameter		Inside
Diameter		Wall
Thickness T		Center
to Center O		Back
to Face K		Pipe
Schedule		Weight
Pounds
11.321.050.13321.62400.5
1 1/41.661.380.142.52.06400.8
1 1/21.91.610.14532.44401.1
22.382.070.15443.19401.9
2 1/22.882.470.20353.94404
33.53.070.21664.75406
3 1/243.550.22675.5408.7
44.54.030.23786.254012.2
55.565.050.258107.754019.2
66.626.070.28129.314032.9
88.627.980.3221612.314064.9
1010.7510.020.3652015.3840112
1212.75120.3752418.38*157
141413.250.375282130208
161615.250.375322430257
181817.250.3753627*325
202019.250.375403020416
242423.250.375483620592

Components Of Return Bend Fitting Manufacturer in India

  • ❖ Arm over
  • ❖ Hanger
  • ❖ Riser nipple
  • ❖ Pendant Sprinkler
  • ❖ Branch line

Long Radius 180 Return Bends Dimensions

Long Radius 180 Return Bends Dimensions
N.P.S Wall
Thickness		 I.D. Back To Face Pipe
Sch.		 O.D. Center
To Center		 Wgt
Pounds
1/2 0.109 0.622 1.88 40 0.84 3 0.32
3/4 0.113 0.824 1.69 40 1.05 2.25 0.34
1 0.133 1.049 2.19 40 1.31 3 0.74
1 1/4 0.14 1.38 2.75 40 1.66 3.75 1.1
1 1/2 0.145 1.61 3.25 40 1.9 4.5 1.6
2 0.154 2.067 4.19 40 2.38 6 3.2
2 1/2 0.203 2.469 5.19 40 2.88 7.5 6.1
3 0.216 3.068 6.25 40 3.5 9 9.4
3 1/2 0.226 3.548 7.25 40 4 10.5 12.8
4 0.237 4.026 8.25 40 4.5 12 17.5
5 0.258 5.047 10.31 40 5.56 15 29.3
6 0.28 6.065 12.31 40 6.63 18 47
8 0.322 7.981 16.31 40 8.63 24 87
10 0.365 10.02 20.38 40 10.75 30 164
12 0.375 12 24.38 * 12.75 36 237
14 0.375 13.25 28 30 14 42 311
16 0.375 15.25 32 30 16 48 408
18 0.375 17.25 36 * 18 54 514
20 0.375 19.25 40 20 20 60 636

Extra Strong

Nominal
Pipe Size		 Wgt
Pounds		 I.D. Wall
Thickness		 O.D. Back To Face Center
To Center		 Pipe
Sch.
1/2 0.45 0.546 0.147 0.84 1.31 3 80
3/4 0.52 0.742 0.154 1.05 1.69 2.25 80
1 0.97 0.957 0.179 1.32 2.12 3 80
1 1/4 1.6 1.28 0.191 1.66 2.75 3.75 80
1 1/2 2.2 1.5 0.2 1.9 3.25 4.5 80
2 4.1 1.94 0.218 2.38 4.12 6 80
2 1/2 7.7 2.32 0.276 2.88 5.12 7.5 80
3 12.4 2.9 0.3 3.5 6.25 9 80
3 1/2 17.1 3.36 0.318 4 7.25 10.5 80
4 24.1 3.83 0.337 4.5 8.25 12 80
5 41.7 4.81 0.375 5.56 10.31 15 80
6 68.2 5.76 0.432 5.76 12.31 18 80
8 140 7.63 0.5 8.63 16.31 24 80
10 217 9.75 0.5 10.75 20.38 30 60
12 311 11.75 0.5 12.75 24.38 36 *
14 400 13 0.5 14 28 42 *
16 540 15 0.5 16 32 48 40
18 686 17 0.5 18 36 54 *
20 840 19 0.5 20 40 60 30
24 1210 23 0.5 24 48 72 *

Short Radius 180 Return Bends Weight

Short Radius 180 Return Bends Weight
Nominal
Pipe Size		 Pipe
Schedule		 O.D. Center
to Center O		 I.D. Wall
Thickness T		 Weight
Pounds		 Back
to Face K
1 40 1.32 2 1.05 0.133 0.5 1.62
1 1/4 40 1.66 2.5 1.38 0.14 0.8 2.06
1 1/2 40 1.9 3 1.61 0.145 1.1 2.44
2 40 2.38 4 2.07 0.154 1.9 3.19
2 1/2 40 2.88 5 2.47 0.203 4 3.94
3 40 3.5 6 3.07 0.216 6 4.75
3 1/2 40 4 7 3.55 0.226 8.7 5.5
4 40 4.5 8 4.03 0.237 12.2 6.25
5 40 5.56 10 5.05 0.258 19.2 7.75
6 40 6.62 12 6.07 0.28 32.9 9.31
8 40 8.62 16 7.98 0.322 64.9 12.31
10 40 10.75 20 10.02 0.365 112 15.38
12 * 12.75 24 12 0.375 157 18.38
14 30 14 28 13.25 0.375 208 21
16 30 16 32 15.25 0.375 257 24
18 * 18 36 17.25 0.375 325 27
20 20 20 40 19.25 0.375 416 30
24 20 24 48 23.25 0.375 592 36

Extra Strong

Nominal
Pipe Size		 O.D. Wall
Thickness T		 I.D. Weight
Pounds		 Back
to Face K		 Center
to Center O
1 1/2 1.9 0.2 1.5 1.5 2.44 3
2 2.37 0.218 1.93 2.9 3.19 4
2 1/2 2.87 0.276 2.32 5.2 3.94 5
3 3.5 0.3 2.9 8.2 4.75 6
3 1/2 4 0.318 3.36 11.7 5.5 7
4 4.5 0.337 3.83 16.4 6.25 8
5 5.56 0.375 4.81 27.7 7.75 10
6 6.62 0.432 5.76 45.7 9 5/16 12
8 8.62 0.5 7.62 96.3 12.31 16
10 10.75 0.5 9.75 143 15.38 20
12 12.75 0.5 11.75 212 18.38 24
14 14 0.5 13 271 21 28
16 16 0.5 15 339 24 32
18 18 0.5 17 425 27 36
20 20 0.5 19 555 30 40
24 24 0.5 23 778 36 48

Technical overview of Long Radius 180 return bends

Technical overview of Long Radius 180 return bends

We maintain stock in these cities

Coimbator, Chennai, Rajkot, Gujarat, Kolkata, Pune, Ahmedabad, Amravati, Madhya Pradesh.


Get our sales contact in below locations

ANSI B16.9, 6 Inch, ASTM A106 Gr.B 5D Return Bend, 45 Degrees, SCH 80 South Korea, Gurgaon, Singapore, NY 12203 (USA), Malaysia
11.90 MM, ANSI B16.49, API 5L X60 45D Return Bend, 36 Inch Mumbai, Noida, Indonesia, Dammam -KSA, Philippines, Belgium
Sch 80, ASTM A234 WPB Return Bend, 4 Inch, Black Coated, 4 Inch Europe, France, Qatar, Bengaluru, Thailand, Sikandrabad
Black Coating, ANSI B16.9 Return Bend, 24 Inch, BW Ends Malaysia, Vadodara, Colombia, Sweden, China, Rajkot
20 Inch, SCH 40, A234 WPB 4D Return Bend, ANSI B16.49, 2032mm, Black Thailand, Czechia, Chennai, Germany, Malaysia, Thiruvananthapuram
R=5D, API5L X60 / A860 WPHY 60 Return Pipe Bends, ASME B16.49 Malaysia, Surat, Bangladesh, USA, Finland, Pune
Seamless 5D Return Bend, Beveled Ends, SS A403 WP304, 90 Deg. Saudi Arabia (KSA), South Africa, Kuwait, Ahmedabad, Brazil
36 Inch, ANSI B16.49 90 Deg Return Bend, MSS SP-75 WPHY-52, R=3D Singapore, Kolkata, Bahrain, Agra, South Africa
API 5L GR.B 90D Return Bend, SCH 40, 5D, ANSI B16.49, 10 Inch Australia, Hyderabad, Thane, Nigeria, France, Philippines, UK
Return Bend Pipe Fittings Patna, Oman, UAE, Hong Kong, Ahmedabad, Malaysia
30 Inch, ASTM A860 WPHY 65 30D Return Bends, MSS SP 75 Chile, Italy, Bhopal, Iran, Singapore, Visakhapatnam, Delhi
ANSI B16.49 3D Seamless Return Bends, 90 Degree United Arab Emirates (UAE), Turkey, Norway, Coimbatore, Malaysia
ASTM A53 GR.B, 26 Inch, ANSI B16.49 Carbon Steel Return Bend, 30 Deg Kochi, Malaysia, Russia, Dehradun, Dubai, Netherlands
MSS SP 75, MSS SP WPHY52 90D Return Bends, 36 Inch, WT 0.938 Inch Spain, UK, Nagpur, Lucknow, Mexico, Egypt, Nashik
DN750, AWWA C208, 90 Degree Return Bend, ASTM A234 WPB UAE, Indore, United Kingdom -UK, Europe, Malaysia
16 Inch, ANSI B16.9 A312 TP304H Return Bend, 90 Deg, 5D Canada, Navi Mumbai, Ellington -United States, Poland, UK
ANSI B16.49 6D Return Bend, 20 Inch, SCH 60, ASTM A53 GR.B, BW Ends Chandigarh, Europe, Japan, Malaysia, Faridabad, Romania
45 DEG, 6 Inch, API 5L X65 PSL2 5D Return Bends, B16.49, SCH XS Singapore, Canada, Ludhiana, Malaysia, Philippines, Jaipur
90 Degree Return Bend, ASME B16.9, BW, 1.5D, 90IN Los Alamos -Mexico, Malaysia, Taiwan, Philippines, Bhuneshwar