Kanak Metal & Alloys is a manufacturer and supplier of different kinds of piping products. We also manufacture different kinds of pipe fittings. The bends are one of the most used of pipe fittings. There are different types of bends as well. The J bend in particular is used in draining systems. The Mild Steel j Bends are applicable for domestic purposes and in low end applications.
J Pipe Bend
Stainless Steel Exhaust J bends
The J bend provides easy installation at draining ends. There are different material grades used to manufacture the J pipes. There are different standards as well. The ASME B16.9 J pipe bend range from ½ inches to 48 inches in diameter.
Although these are used in low end applications, the higher material grades could be used in high end applications as well. For example, the Stainless Steel Exhaust J bends are used in exhaust systems. For this, higher grade materials such as 316 and other stainless steel types are used. High temperature service pipes require high temperature resistant material. Header J Bends are special types of bends in that they have a header that could be attached to any other extension in the piping system. Our J Bend Pipe products are of superior quality. You can contact us for any custom designs as well.
Available Radius : 2.5D, 3D Bends, 5D, 10D Bends, 22D.
Types : Welded, Seamless, ERW, Fabricated
Bends Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm.
J Bends Pipe Size : Seamless 1/2 inch to 24 inch; Welded / ERW : 2 inch to 36 inch.
O.D. : 38.0 mm - 206.0 mm.
Bending angle (θ) : 15 Degree, 30°, 45 Deg, 60°, 90 Deg, 135°, 180 Degree Elbow.
|A234 WP9 Cl1||SA 234 WP22|
|SA234 WP11 J Bends||A 234 WP9|
|A234 WP91 J Bends||ASTM A234 WP5|
|Diameter Nominal||Inches||Ser. B||Ser. A|