5D Pipe Bend

Manufacturer of Stainless Steel 45 deg 5d bend in India

Kanak Metal & Alloys is a leading supplier of pipe bends. We manufacture different metallic products and specialize in pipe fittings. The 5D Pipe Bend are one type of pipe fittings. There are different dimensions to the bends. The bending radius is mentioned in relation to the diameter of the pipes. The pipeline 5d bends has a radius that is 5 times the diameter of the bends. This means the change of direction is very smooth. The smooth transmission is needed in fluid that are high in viscosity like the petroleum liquids and high density oils.

5D Pipe Bend

5D Pipe Bend

45 Deg 5d Bend

45 Deg 5d Bend

This is important because these fluids can create high momentum and the smooth turning distributes the momentum and impact pressure throughout the bent surface. The 5d induction bend is heated and bent through inductors to maintain a smooth curve without affecting the diameter. We produce different kinds of 5D bends.


The 90 degree 5d bend dimensions are determined by the standards they are made under. There are pipe bends ranging from ½ inches to 48 inches in general. But there are also other dimensions available. The 45 deg 5d bends turns the direction by 45 degree angle. We produce the En10253-2 P235Gh 5D Bends follows the carbon steel fittings standards. You can always contact us with your custom needs and we will provide exactly what you want.

Find out Carbon Steel 5d induction bend specification and Mild Steel 90 degree 5d bend dimensional table


90 degree 5d bend Standard Dimensions


90 degree 5d bend Standard Dimensions

NPS Bevel O.D. Center-to-End
D C M
Diameter Nominal Inches Ser. B Ser. A
20 3/4 25 26.9 29
200 8 219 219.1 178
25 1 32 33.7 38
32 11/4 38 42.4 48
150 6 159 168.3 143
50 2 57 60.3 64
65 21/2 76 76.1(73) 76
80 3 89 88.9 86
450 18 478 457.2 343
90 31/2 101.6 95
100 4 108 114.3 105
500 20 529 508.0 381
300 12 325 323.9 254
400 16 426 406.4 305
600 24 630 610 432
700 28 720 711 521
950 38 965 711
800 32 820 813 597
850 34 864 635
1050 42 1067 762 711
1200 48 1220 1220 889 838
1100 44 1120 1118 813 762

Pipeline 5d Bend Specifications


5d Bends Size : Welded / ERW : 2 inch to 36 inch; Seamless 1/2 inch to 24 inch.

Bending Radius : 5D Pipe Bends.

Types : Welded, Seamless, ERW, Fabricated

Finishing : 2b finish, Finished pickled, # 4 finish, 180 grit finish, #8 finish ra

Bends Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm.

O.D. : 38.0 mm - 206.0 mm.

Bending angle (θ) : 15 Degree, 30°, 45 Deg, 60°, 90 Deg, 135°, 180 Degree Elbow.

Standard Radius : Ø26.9 - Ø168.3, CLR = 2.5 X dia. | Ø20 - Ø28mm, CLR = 2.0 X dia.


What are the different grades of Carbon Steel 5D Pipe Bends ?


ASTM A420 WPL3 P235GH DIN 2391 ST 52
ASTM A106 GR. B A515 Gr 70 DIN 2633 c22.8
ASTM A420 WPL6 ASTM A53 Gr.B S235JR
ASTM A106 Grade A A516 Gr. 70 ASTM A333 Gr 6
A516 Gr 60 ST35.8, ST45.8 ASTM A234 WPB
A515 Grade 60 ST37.0