1.5d Pipe Bend is one of the piping fittings used in piping applications to connect pipes together. There are different types of fittings such as tees, elbows, bends and couplings. There are different types of piping bends with different dimensions such as the Pipe Bend Radius 1.5d. The piping bend’s bending radius is measured in relation to the outer diameter of the pipes. If the bending radius is equal to the outer diameter it is expressed as 1D. The 1.5d bend dimensions indicate that the pipes bends have a bending radius that of the outer diameter of the pipe.
Stainless Steel 1.5D Pipe Bend
1.5D Seamless Pipe Bend Manufacturer
The piping bends can come in up to 10D in bending radius. There are also different types such as the ANSI B16.9 Buttweld 1.5D Pipe Bends which are buttwelded and are suitable for welding applications. The specification is for wrought buttweld fittings of al types in seamless, ERW, welded and fabricated productions. There are different sizes of the Stainless Steel 1.5D Pipe Bend Manufacturer in India ranging from ½ inches to 48 inches in this specification and they range in schedules 5S through 160 and XXS.
The different sizes and types of fittings are used with different applications. The material used for the making of fittings vary for applications as well. The 1.5D Carbon Steel Pipe Bend are used in high strength, high toughness application condition. We supply all types of piping bends and other fittings to suit different applications.
O.D. : 38.0 mm - 206.0 mm.
Radius : 1.5D Bend.
Types : Manufacturer of 1.5 d elbow in Welded, Seamless, ERW, Fabricated
1.5D Bend Size : Seamless 1/2 inch to 24 inch; Welded / ERW : 2 inch to 36 inch.
Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm.
Bending angle (θ) : 15 Deg, 22 Deg, 22.5 Deg, 30Deg, 45 Deg, 60Deg, 90 Deg, 135 Deg, 180 Degree Elbow or custom Manufacturer in India.
| NPS inches |
Bends 1.5D |
Bends 1.5D |
||||||
|---|---|---|---|---|---|---|---|---|
| Sch. 5S |
Sch. 10S |
Sch. 40S |
Sch. 80S |
Sch. 5S |
Sch. 10S |
Sch. 40S |
Sch. 80S |
|
| 1/2 | 0.05 | 0.06 | 0.08 | 0.10 | 0.03 | 0.04 | 0.05 | 0.07 |
| 3/4 | 0.06 | 0.07 | 0.09 | 0.11 | 0.04 | 0.05 | 0.06 | 0.07 |
| 1 | 0.09 | 0.15 | 0.18 | 0.20 | 0.06 | 0.10 | 0.12 | 0.13 |
| 1 1/4 | 0.13 | 0.20 | 0.25 | 0.35 | 0.09 | 0.13 | 0.17 | 0.12 |
| 1 1/2 | 0.18 | 0.30 | 0.40 | 0.50 | 0.12 | 0.20 | 0.27 | 0.33 |
| 2 | 0.30 | 0.50 | 0.70 | 0.90 | 0.20 | 0.33 | 0.47 | 0.60 |
| 2 1/2 | 0.60 | 0.85 | 1.35 | 1.80 | 0.40 | 0.60 | 0.90 | 1.20 |
| 3 | 0.90 | 1.30 | 2.00 | 2.90 | 0.60 | 0.90 | 1.35 | 1.90 |
| 4 | 1.40 | 2.00 | 4.00 | 5.90 | 0.90 | 1.35 | 2.65 | 3.90 |
| 5 | 2.90 | 3.60 | 6.50 | 9.70 | 1.95 | 2.40 | 4.35 | 6.50 |
| 6 | 4.00 | 5.00 | 10.5 | 16.0 | 2.70 | 3.35 | 7.00 | 10.5 |
| 8 | 7.40 | 10.0 | 21.5 | 33.5 | 4.90 | 6.70 | 14.5 | 22.5 |
| 10 | 13.6 | 16.8 | 38.5 | 52.5 | 9.10 | 11.2 | 25.6 | 35.0 |
| 12 | 23.4 | 27.0 | 59.0 | 79.0 | 15.6 | 18.0 | 39.5 | 53.0 |
| 14 | 29.0 | 35.0 | 70.0 | 94.0 | 19.3 | 23.5 | 47.0 | 63.0 |
| 16 | 41.3 | 47.0 | 95.0 | 125 | 27.5 | 31.5 | 63.5 | 84.0 |
| 18 | 51.8 | 59.0 | 120 | 158 | 34.5 | 39.5 | 80.0 | 105 |
| 20 | 73.0 | 85.0 | 146 | 194 | 49.0 | 57.0 | 98.0 | 129 |
| 24 | 122 | 140 | 210 | 282 | 82.0 | 94.0 | 140 | 188 |
| Inside Diameter | Wall Thickness | Wt Per Piece | Centreline Radius |
'A' mm |
'B' mm |
kilos |
'C' mm |
| 15 | 1.50 | 0.03 | 30 |
| 20 | 1.50 | 0.04 | 35 |
| 25 | 1.50 | 0.06 | 32.5 |
| 32 | 1.50 | 0.11 | 45 |
| 40 | 1.50 | 0.20 | 60 |
| 50 | 2.00 | 0.31 | 73 |
| 65 | 2.00 | 0.52 | 95 |
| 80 | 2.00 | 0.77 | 123 |
| 100 | 2.00 | 1.20 | 150 |
| 100 | 3.00 | 1.79 | 150 |
| 125 | 2.00 | 1.88 | 188 |
| 150 | 2.00 | 2.69 | 225 |
| 150 | 3.00 | 4.09 | 225 |
| Kanak Metal & Alloys is a Manufacturer of ASTM A403 WP304 Elbow 1.5 d in various dimensions | |||
Leading Manufacturer of ASTM A234 Grade WP11 1.5 d bend with best discounted rates.
| Product | Price |
| Bend long radius 1.5d pipe elbow dimensions 1/2 coating black 3 ways tee fittings | $0.10 - $9.20/ Piece |
| 304 316 LR 1.5D BW sch10 90 degree 4 inch stainless steel elbow | $4.80 - $7.95/ Kilogram |
| 2″ 50.8mm Stainless Steel 1.5d Mandrel Bend | $1.30 - $24.98/ Piece |
| ANSI butt-welded 1.5d carbon steel elbows or bends | $0.15 - $48.80/ Piece |
| Standard pipe | Spec | . Bauart 5 | 2,5D | |
|---|---|---|---|---|
| DN | Diameter [ØD] | CLR | CLR | CLR |
| 20 | 26,9 | 110 | 67 | |
| 25 | 33,7 | 110 | 84 | |
| 32 | 42,4 | 110 | 106 | |
| 40 | 48,3 | 110 | 212 | |
| 50 | 60,3 | 125 | 151 | |
| 65 | 76,1 | 175 | 190 | |
| 80 | 88,9 | 205 | 222 | |
| 100 | 114,3 | 270 | 286 | |
| 125 | 139,7 | 330 | 350 | |
| 150 | 168,3 | 390 | 421 | |
| 200 | 219,1 | 510 | ||
| 250 | 273 | 650 | ||
| 300 | 323,9 | 775 | ||
| 350 | 355,6 | 850 | ||
| 400 | 406,4 | 970 | ||
| 500 | 508 | 1245 | ||
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameter at Bevel (D) |
+ 1.6 – 0.8 |
1.6 | 1.6 | + 2.4 – 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) |
+ 4 – 3.2 |
+ 6.4 – 4.8 |
+ 6.4 – 4.8 |
+ 6.4 – 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4 – 4.8 |
+ 6.4 – 4.8 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
| Kanak Metal & Alloys is SS316 1.5d bend Manufacturer in various Bending Radius. | ||||
| ND | Max off angle | Max off plane |
|---|---|---|
| Q | P | |
| 1/2 a 4 | 1 | 2 |
| 5 a 8 | 2 | 4 |
| 10 a 12 | 3 | 5 |
| 14 a 16 | 3 | 7 |
| 18 a 24 | 4 | 10 |
| 26 a 30 | 5 | 10 |
| 32 a 42 | 5 | 13 |
| 44 a 48 | 5 | 20 |
| API 5L GR.B 1.5D Bends, ANSI B16.49, 10 Inch, SCH 40, 1.5 D | Philippines, Indonesia, Mumbai, Belgium, Dammam -KSA, Noida |
| 45 DEG, 6 Inch, API 5L X65 PSL2 1.5D Bends, B16.49, SCH XS | Qatar, Thailand, Sikandrabad, France, Europe, Bengaluru |
| BW Ends, ANSI B16.49 1.5 D Bends, SCH 60, ASTM A53 GR.B, 20 Inch | Czechia, Thailand, Chennai, Germany, Malaysia, Thiruvananthapuram |
| Black Coating, ANSI B16.9 1.5 D Bends, 24 Inch, BW Ends | Surat, Malaysia, Bangladesh, Pune, Finland, USA |
| 16 Inch, 90 Deg, ANSI B16.9 A312 TP304H Bends, 1.5D | Saudi Arabia (KSA), Kuwait, Ahmedabad, South Africa, South Africa, Kuwait, Brazil |
| 11.90 MM, API 5L X60 1.5D Bends, 36 Inch, ANSI B16.49 | Agra, Kolkata, Singapore, South Africa, Bahrain |
| ANSI B16.49 1.5D Hot Induction Seamless Bends, 90 Degree | UK, Australia, France, Philippines, Thane, Hyderabad, Nigeria |
| 1.5D Bend Pipe Fittings | UAE, Ahmedabad, Hong Kong, Oman, Patna, Malaysia |
| 90 Degree Mitred 1.5D Bends, DN750, AWWA C208, ASTM A234 WPB | Iran, Chile, Bhopal, Italy, Delhi, Singapore, Visakhapatnam |
| API5L X60 / A860 WPHY 60 Bends, R=1.5D, ASME B16.49 | United Arab Emirates (UAE), Coimbatore, Norway, Malaysia, Turkey |
| MSS SP 75, 36 Inch, MSS SP WPHY52 1.5D Bends, WT 0.938 Inch | Kochi, Dehradun, Dubai, Netherlands, Malaysia, Russia |
| Sch 80, 4 Inch, Black Coated, ASTM A234 WPB 1.5 D Bends | Mexico, Spain, Lucknow, Nashik, UK, Egypt, Nagpur |
| 36 Inch, ANSI B16.49 90 Deg Bends, R=1.5D, MSS SP-75 WPHY-52 | Indore, United Kingdom -UK, UAE, Europe, Malaysia |
| 30 Inch, MSS SP 75, ASTM A860 WPHY 65 1.5 D Bends | Navi Mumbai, Ellington -United States, Canada, UK, Poland |
| 90 Degree Miter Bends, BW, 90IN, 1.5D, ASME B16.9 | Ludhiana, Singapore, Philippines, Canada, Malaysia, Jaipur |
| ANSI B16.49 Carbon Steel 1.5D Bends, 26 Inch, 30 Deg, ASTM A53 GR.B | Japan, Malaysia, Europe, Faridabad, Romania, Chandigarh |
| Seamless 1.5D Bends, Beveled Ends, SS A403 WP304, 90 Deg. | China, Rajkot, Colombia, Sweden, Vadodara, Malaysia |
| 45D, 72 Inch, BW, 1.5D Miter Bends, API 5L Gr. B, | Taiwan, Los Alamos -Mexico, Bhuneshwar, Philippines, Malaysia |
| 2032mm, 20 Inch, A234 WPB 1.5D Bends, ANSI B16.49, SCH 40, Black | Malaysia, South Korea, Gurgaon, NY 12203 (USA), Singapore |
Gujarat, Rajkot, Amravati, Pune, Coimbator, Ahmedabad, Chennai, Kolkata, Madhya Pradesh.